Home

Products

Integrated Circuits (ICs)

Interface

Analog Switches, Multiplexers, Demultiplexers

DG445CJ

Banner
productimage

DG445CJ

IC SWITCH SPST-NOX4 85OHM 16DIP

Manufacturer: Analog Devices Inc./Maxim Integrated

Categories: Analog Switches, Multiplexers, Demultiplexers

Quality Control: Learn More

Analog Devices Inc./Maxim Integrated DG445CJ is a quad single-pole, single-throw (SPST) analog switch. This component features four independent switches, each configured as normally open (NO). With a maximum on-state resistance of 85 Ohms, it offers low signal path resistance. The DG445CJ supports dual power supplies ranging from ±4.5V to ±20V or single supply from 10V to 30V. Channel capacitance is 4pF for both on and off states, and charge injection is specified at 5pC. Crosstalk is better than -100dB at 1MHz, and leakage current is a maximum of 500pA. Switching times are up to 250ns for turn-on and 170ns for turn-off. This device is supplied in a 16-pin PDIP package suitable for through-hole mounting. Typical applications include signal routing, multiplexing, and general-purpose switching in industrial and consumer electronics.

Additional Information

Series: -RoHS Status: RoHS non-compliantManufacturer Lead Time: No lead time information availableProduct Status: ObsoletePackaging: TubeDatasheet:
Technical Details:
PackagingTube
Package / Case16-DIP (0.300"", 7.62mm)
Mounting TypeThrough Hole
Operating Temperature0°C ~ 70°C (TA)
On-State Resistance (Max)85Ohm
-3db Bandwidth-
Supplier Device Package16-PDIP
Voltage - Supply, Single (V+)10V ~ 30V
Voltage - Supply, Dual (V±)±4.5V ~ 20V
Charge Injection5pC
Crosstalk-100dB @ 1MHz
Switch CircuitSPST - NO
Multiplexer/Demultiplexer Circuit1:1
Channel-to-Channel Matching (ÃŽ”Ron)4Ohm (Max)
Switch Time (Ton, Toff) (Max)250ns, 170ns
Channel Capacitance (CS(off), CD(off))4pF, 4pF
Current - Leakage (IS(off)) (Max)500pA
Number of Circuits4

Request a Quote

Name (required)

Phone (required)

Work Email (required)

Country (required)

Company Name (required)

CAPTCHA

By providing a telephone number and submitting the form, you are consenting to be contacted by SMS text message and agreeing to our Privacy Policy. Message frequency may vary. Message and data rates may apply. Reply STOP to opt out of further messaging. Reply HELP for more information.
Clients Also Buy
Integrated Circuit FAQs

An integrated circuit (IC) is a semiconductor chip that contains transistors, resistors, capacitors, and other electronic components on a single silicon substrate. ICs are the foundation of modern electronics and power devices such as smartphones, computers, automotive systems, and industrial equipment.

Integrated circuits work by routing electrical signals through microscopic semiconductor components fabricated onto a silicon chip. Depending on the design, ICs can process, amplify, store, or control electronic data.

Integrated circuits are used in:

The different types of integrated circuits include:

Frequently Asked Questions

As a full line supplier, we specialize in sourcing obsolete and hard to find electronic components for your projects.

After we receive your request submission, one of our account executives will reach out to your team to gather more information about your project requirements and ensure we tailor the order to your needs.

Once requirements such as date codes, quantities, target prices, testing requirements, and more are discussed, our purchasing team will secure stock through Microchip USA’s direct access to manufacturing partners’ excess inventory lists.

Our operations teams will handle logistics and fulfillment to ensure supply chain continuity, and our support team will provide clear communication throughout the process.

Our net terms for electronic component sourcing are flexible and vary by order. Our account executives will work with you to ensure our terms meet your company’s needs. We also offer scheduled shipments and inventory management solutions to ensure a steady supply of electronic components, maintain cash flow, and maximize warranty periods. We always offer a warranty on all tested parts. See our sales terms and conditions for more information.

We partner with industry-leading AS6171 & AS6081-certified third party testing labs to mitigate risk and support a wide array of end uses for your company’s requirements. Testing includes but isn’t limited to: Decapsulation & Internal Dye Verification. X-Ray Inspection & Analysis, External Visual Inspection, Surface Texture Analysis (SEM), and Electrical Pin Correlation.

Industry News
Component Articles